5" & 8" SKID STEER CHIPPERS
Turn Your Skid Steer Into A Mobile Workstation
Bear Cat’s line of skid steer chippers attach in
seconds and are driven solely by your skid steer’s
hydraulics. They are available in both standard/
high flow and high flow models and will make
short work of any troublesome debris.
An infinite number of hydraulic feed speeds
are available with a simple handle turn.
The chipper has two mounts, so it can be
set to feed in front or to the curb side.
A four-position manual valve easily
controls the hydraulic feed roller.
Model 74800
Model
74500
74800
Hydraulics
Feed Opening
Size
Chipper
Capacity
Feed
System
Chipper
Disc
Operating
Weight (Lbs.)
Standard or
high-flow**
5.5"x7"
3"*
5"*
hydraulic
hydraulic
20"x1.25"
140 lbs.
1145
1525
High-flow***
9"x9"
30"x1.25"
275 lbs.
*Continuous chipping size rating refers to the suggested feeding size of limbs for normal operation
**Standard-flow requires a minimum of 15 gallons per minute (GPM) hydraulic oil flow
***High-flow requires a minimum of 25 GPM hydraulic oil flow
Built-in hydraulic jack makes feed roller
maintenance quick and easy.
8
|
Motorola BACKFLIP 68000202889 User Manual
Magnavox AZ 6823 User Manual
Kompernass KH 2216 User Manual
Kenwood KDC MPV7020 User Manual
IBM 71P7279 User Manual
Hitachi Travelstar HTE727564A9E364 User Manual
Clarion DXZ656MP User Manual
Centon electronic DataStick Pro RCDSP64GB 001 User Manual
Braun KF 560 User Manual
Agri Fab Chip N Vac 2468 User Manual