WF308
INSTRUCTION MANUAL
Contents
Warnings & Precautions...................................................................................2
Important Safety Instructions............................................................................3
In the Box & Features.......................................................................................4
Powering the Unit.............................................................................................5
Setting the Clock and Tuning the AM/FM Radio...............................................6
Tuning the WB Radio and Using the Emergency Siren....................................7
Using the Lantern and Torch ............................................................................8
Using the Dynamo Hand Crank........................................................................9
Controls and Definitions ............................................................................ 10-11
Warranty & Service information......................................................................12
Important Safety Instructions
1. Read Instructions - All the safety and operating instruction should be read
receiver, be sure the antenna system is grounded so as to provide some
before the product is operated.
protection against voltage surges and built-up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and supporting structure, grounding
of the mast and supporting structure, grounding of the lead-in wire to an
antenna-discharge unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements for
the grounding electrode.
2. Retain Instructions - The safety and operating instruction should be
retained for future reference.
3. Heed Warnings - All warning on the product and in the operating
instructions should be adhered to.
4. Follow instructions - All operating and use instructions should be
followed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.
6. Attachments - Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement,
or near a swimming pool, and the like. The apparatus shall not be exposed
to dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on apparatus.
See figure:
16. Lightning - For added protection for this product during a lightning storm,
or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and power-line surges.
8. Accessories - Do not place this product on an unstable cart, stand tripod,
bracket, or table. The product may fall, causing serious injury to a child
or adult, and serious damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold with
the product. Any mounting of the product should follow the manufacturer’s
instructions, and should use a mounting accessory recommended by the
manufacturer.
17. Power Lines - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
9. A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
18. Overloading - Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
See figure:
19. Object and Liquid Entry - Never push objects of any kind into this
product through openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the product.
20. Servicing - Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
10. Ventilation - Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided
or the manufacturer’s instruction have been adhered to.
21. Damage Requiring Service - Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
11. Power Sources - This product should be operated only from the type of
power source indicated on the marking label. If you are not sure of the type
of power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other
sources, refer to the operating instruction.
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
12. Grounding or Polarization - This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the
polarizes plug.
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this
indicates a need for service.
22. Replacement Parts - When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufacturer
or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
Alternate Warnings - This product is equipped with a three-wire
grounding-type plug, a plug having a third (grounding) pin. This plug
will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the
grounding-type plug.
23. Safety Check - Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
24. Wall or Ceiling Mounting - The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.
13. Power-Cord Protection - Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and point where they exit from the product.
25. Heat - The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat. Battery shall not be exposed to excessive heat such as
sunshine, fire, or the like.
14. Protective Attachment Plug - The product is equipped with an attachment
plug having overload protection. This is a safety feature. See Instruction
Manual for replacement or resetting of protective device. If replacement of
the plug is required, be sure the service technician has used a replacement
plug specified by the manufacturer that has the same overload protection as
the original plug.
26. Main plug is used as disconnect device and it should remain readily
operable during intended use. In order to disconnect the apparatus from
the mains completely, the mains plug should be disconnected from the
mains socket outlet completely.
27. Excessive sound pressure from earphones and headphones can cause
hearing loss.
15. Outdoor Antenna Grounding - If an outside antenna is connected to the
3
In the Box
• WF308
• Documentation
Features
• AM/FM Radio with Digital Readout
• Instant WeatherBand
• 7-LED Front Torch with Multi-Inten-
sity Light Switch
• Heavy-Duty, Hand-Crank Dynamo
Motor for power generation
• NiMH Rechargeable Battery Pack
built-in
• 5-LED Top Lantern
• Built-In Speaker
• DC: Uses 4 x “C” Batteries , (not
included)
• DC Input Jack, (AC & DC Adaptors,
not included)
4
Powering the Unit
The internal NiMH battery in the unit can
be charged by plugging the unit into a
standard AC (120V - 60Hz) outlet using
the DC Power Jack.
This requires an AC or DC Adapter (not
included)
Batteries
The unit can be powered by 4 C-Sized batteries, or the internal NiMH battery.
DC 1.5V
C-Size x 4
(Not Included)
NiMH 3.6V
120mAH
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc)
batteries.
5
Setting the Clock
1. Power the unit off by turning the Power/Volume Dial counter clockwise.
2. Press and hold the Time Set Button.
3. While holding the Time Set Button, press the Hour Button to adjust the hour and
the Minute Button to adjust the minute.
4. Once the time is set, release the Time Set Button.
Tuning the AM/FM Radio
1. Power the unit on by turning the Power/Volume Dial clockwise.
2. Adjust the FM/AM/WB Switch to FM or AM.
3. Turn the Tuning Dial to adjust the FM or AM radio frequency.
The current FM or AM radio frequency will be displayed on the LCD Display.
AM
KHz
511
6
Tuning the WB (WeatherBand) Radio
1. Power the unit on by turning the Power/Volume Button clockwise.
2. Adjust the FM/AM/WB Switch to WB.
3. Turn the Tuning Dial to adjust the WB radio frequency.
The WB radio frequency will not display on the LCD Display.
12:15
7
Using the Lantern and Torch
1. With the unit powered off or on, adjust the Torch/Lantern Switch to Hi, Lo, Off,
or Lantern.
Torch Hi
Torch Lo
Lantern
8
Using the Dynamo Hand Crank
1. Fold the Dynamo Hand Crank arm down.
2. Turn the Dynamo Hand Crank clockwise continuously to charge the internal
NiMH battery.
3. If the internal batteries are completely dead, turning the Dynamo Hand Crank
continuously will power the unit.
9
Location of Controls
1
7
8
2
3
9
10
11
12
4
5
13
6
14
10
Control Definitions
1
2
3
4
5
6
7
8
9
Dynamo Hand Crank
Turn the Dynamo Hand Crank clockwise to power the unit and charge the internal battery.
Torch/Lantern Switch
Adjust the Torch/Lantern Switch to turn the torch or lantern on, and to adjust the intensity of the torch.
LCD Display
Use the LCD Display to view the time and AM/FM radio frequency.
Tuning Dial
Turn the Tuning Dial to adjust the AM, FM, and WB radio frequency.
Power/Volume Dial
Turn the Power/Volume Dial to turn the unit off and on, and adjust the volume.
Torch
Multi-Intensity 7 LED flashlight.
Hand Strap
Use the Hand Strap to secure the unit to your wrist.
Lantern
5 LED lantern.
Time Set Button
Press and hold the Time Set Button when setting the clock.
10 Min. Button
When setting the clock, press the Min. Button to adjust the minute.
11 DC Power Jack
Use the DC Power Jack to power or charge the unit. (Requires an AC/DC adapter, not included)
12 Hour Button
When setting the clock, press the Hour Button to adjust the hour.
13 FM/AM/WB Radio Switch
Adjust the FM/AM/WB Radio Switch to listen to the FM, AM, or WB (WeatherBand) radio.
14 Battery Compartment
Requires 4 C-Size batteries, not included. Read page 5 before operating the unit on battery
power.
11
90 Day Limited Warranty
Service Information
Address 2116 Carr Street, St. Louis MO, 63106
Phone
Fax
1-314-621-2881
1-314-588-1805
Email
Website www.weather-x.net
To download this Instruction Man- Para descargar este manual de Pour télécharger ce manuel
ual in English, Spanish, or French instrucción en inglés, español, o d’instruction en anglais, espagnol,
visit the Support section at
francés visite la sección de la ayu- ou le Français visitez la section de
© 2007 DPI, Inc. All NOAA related logos and references are trademarked or registered trademarks of the National Oceanic
and Atmospheric Administration (NOAA), U.S. Department of Commerce
|